TI Home > Semiconductors > Amplifiers and Linear > Special Function Amplifiers > PWM Power Drivers >

DRV8809 Status: ACTIVE

Combo motor driver with DC-DC converters

      
         
Alert me about changes<br/>to this product


Datasheet

Download - PDF Icon
  • Combination Motor Drivers With DC-DC Converters (Rev. A) (drv8809.pdf, 1063 KB)
    17 Jul 2008 Download
 

Functional Block Diagram


enlarge Enlarge

 DRV8809
Vs(Min)(V)7  
Vs(Max)(V)40  
Output Current(Min)(A)0.8  
rDS(on)(Ohms)0.5  
Switching Frequency (Single-Ended)(kHz)50  
Operating Temp Range(Celsius)-10 to 50  
Pin/Package64HTQFP  
 Samples
 Inventory

Customers Who Evaluated This Product Also Evaluated

  • DRV8801: Full bridge motor driver
  • DRV8810: Combo Motor Drivers With DC-DC Converters
  • DRV8811: Stepper motor controller IC

Product Information

Features

  • Configurable to Eight Modes of Combination Motor Driver
    • Bipolar Stepper Motor Driver
      • 16-Step Current-Mode Control
      • 800-mA Average Output Current as Stepper Motor Drive
    • DC Motor Driver
      • 800-mA Maximum Continuous Current and 8-A/500-ns or 3-A/100-ms Peak Current for Each DC Motor Drive
    • Low ON resistance Rds(ON) = 0.55 at TJ = 25°C (Typ)
  • Three Integrated DC-DC Converters
    • On/Off Selectable Using C_SELECT Pin and Serial Interface
    • Outputs Programmable With External Resistor Network From 1.5 V to VDIN × 0.8
    • 1.5-A Output Capability for All Three Channels
  • 7-V to 40-V Operating Voltage Range for DC-DC Converters
  • Two Serial Interfaces for Communications
  • Thermally-Enhanced Surface-Mount 64-Pin QFP PowerPAD™ Package
    (Eco-Friendly – RoHS and No Sb/Br)
  • Power-Down Function (Deep-Sleep Mode)
  • Reset Signal Output (Active Low)
  • Reset (All Clear) Control Input

PowerPAD is a trademark of Texas Instruments Inc.

DESCRIPTION/ORDERING INFORMATION

The DRV8809/DRV8810 provides an integrated motor driver solution. The chip has four H-bridges internally and is configurable to eight different modes of combination motor driver control.

The output driver block for each H-bridge consists of N-channel power MOSFETs configured as full H-bridges to drive the motor windings. The stepper motor control has a 16-step mode programmable through the three-wire serial interface (SPI). The SPI input pins are 3.3-V compatible and 5-V tolerant.

The DRV8809/DRV8810 has three DC-DC switch-mode buck converters to generate a programmable output voltage from 1.5 V to 80% of VDIN (Channel A) or up to 10 V (for Channel B and Channel C), with up to 1.5-A load current capability. The outputs are selected using the C_SELECT terminal at start-up or using serial interface during operation.

An internal shutdown function is provided for overcurrent protection (OCP), short-circuit protection, overvoltage/undervoltage lockout (UVLO), and thermal shutdown (TSD). Also, the device has a reset function that operates at power on and at input to the In-Reset pin.

    

Pricing / Packaging / CAD Design Tools / Samples

PricePackagingSamples
DeviceStatusTemp (oC)Price | QuantityPackage | PinsTop Side MarkingPackage QTY | Package CarrierSamples
DRV8809PAPACTIVE-10 to 506.75 | 100uHTQFP (PAP) | 64 View 160 | JEDEC TRAY (10+1)

* Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For higher volume price quotes,prices in local currency or delivery quotes, please contact your local Texas Instruments Sales Office or Authorized Distributor.

Inventory

  TI Inventory Status Reported Distributor Inventory
DRV8809PAPAs of 10:04 AM GMT, 09 Jan 2009As of 10:04 AM GMT, 09 Jan 2009
 In StockIn Progress QTY | DateLead TimeRegionCompanyIn StockPurchase
 0* >10k | 16 Feb 6 Weeks AmericasDigiKey 218
View all Distributors  

* Our information is updated daily, so please check back with us soon if this does not meet your needs. You may also contact your TI Authorized Distributor , including those listed above, for real time stock information.

** Lead time information is not available at this time. However, our information is updated daily so please check back with us soon. Please contact your preferred TI Authorized Distributor for additional information.

Quality & Lead (Pb)-Free Data

 Product ContentDPPM / MTBF / FIT Rate
DeviceEco Plan* Lead / Ball FinishMSL Rating / Peak ReflowDetailsDetails
DRV8809PAP RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU Level-3-260C-168 HRViewView

* The planned eco-friendly classification: Pb-Free (RoHS) or Pb-Free (RoHS Exempt) or Green (RoHS & no Sb/Br) - please click on the Product Content Details "View" link in the table above for the latest availability information and additional product content details.

If the information you are requesting is not available online at this time, contact one of our Product Information Centers regarding the availability of this information.

Technical Documents

Datasheets

  • Combination Motor Drivers With DC-DC Converters (Rev. A) (drv8809.pdf, 1063 KB)
    17 Jul 2008 Download

Application Notes

  • DRV8809/DRV8810 EVM (slva303.htm, 8 KB)
    13 May 2008 Abstract
  • Shelf-Life Evaluation of Lead-Free Component Finishes (szza046.htm, 8 KB)
    24 May 2004 Abstract
  • Thermal and Electrical Properties of Selected Packaging Materials (sbfa010.htm, 8 KB)
    04 Oct 2000 Abstract

User Guides

  • DRV8809, DRV8810 User's Guide (slvu257.pdf, 340 KB)
    15 Jul 2008 Download

More Literature

View More Literature for PWM Power Drivers

 Alternative Products - Are similar to DRV8809
Customers Who Evaluated This Product Also Evaluated...
Part #Name Comments
DRV8801Full bridge motor driverTI customers also evaluated this product.
DRV8810Combo Motor Drivers With DC-DC ConvertersTI customers also evaluated this product.
DRV8811Stepper motor controller ICTI customers also evaluated this product.

Related End Equipments

All End-Equipment

Support and Community

Customer Tags Help

No Tags are Available for this Part Number

Other Support