TLV2432M Status: ACTIVE

Product Information

Features

• Output Swing Includes Both Supply Rails
• Extended Common-Mode Input Voltage Range...0 V to 4.5 V (Min) with 5-V Single Supply
• No Phase Inversion
• Low Noise...18 nV/Hz\ Typ at f = 1 kHz
• Low Input Offset Voltage
  950 uV Max at T_A = 25°C (TLV243xA)
• Low Input Bias Current...1 pA Typ
• Very Low Supply Current...125 uA Per Channel Max
• 600- Output Drive
• Macromodel Included
• Available in Q-Temp Automotive
  HighRel Automotive Applications
  Configuration Control / Print Support
  Qualification to Automotive Standards

Advanced LinCMOS is a trademark of Texas Instruments.

Description

The TLV243x and TLV243xA are low-voltage operational amplifier from Texas Instruments. The common-mode input voltage range for each device is extended over the typical CMOS amplifiers making them suitable for a wide range of applications. In addition, these devices do not phase invert when the common-mode input is driven to the supply rails. This satisfies most design requirements without paying a premium for rail-to-rail input performance. They also exhibit rail-to-rail output performance for increased dynamic range in single- or split-supply applications. This family is fully characterized at 3-V and 5-V supplies and is optimized for low-voltage operation. The TLV243x only requires 100 uA (typ) of supply current per channel, making it ideal for battery-powered applications. The TLV243x also has increased output drive over previous rail-to-rail operational amplifiers and can drive 600- loads for telecom applications.

The other members in the TLV243x family are the high-power, TLV244x, and micro-power, TLV2422, versions.

The TLV243x, exhibiting high input impedance and low noise, is excellent for small-signal conditioning for high-impedance sources, such as piezoelectric transducers. Because of the micropower dissipation levels and low-voltage operation, these devices work well in hand-held monitoring and remote-sensing applications. In addition, the rail-to-rail output feature with single- or split-supplies makes this family a great choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLV243xA is available and has a maximum input offset voltage of 950 uV.

If the design requires single operational amplifiers, see the TI TLV2211/21/31. This is a family of rail-to-rail output operational amplifiers in the SOT-23 package. Their small size and low power consumption, make them ideal for high density, battery-powered equipment.