UC3906 Status: ACTIVE

Linear Lead-Acid Battery Charger


      
         
Alert me about changes<br/>to this product


Datasheet

Download - PDF Icon

 UC2906 UC3906
# Series Cells Multiple  
Charge Current(Max)(A) >2  
Charge Status Outputs1  1  
Control TopologyLinear  Linear  
Primary Charge Termination MethodMaximum Voltage, Minimum Current  Maximum Voltage, Minimum Current  
Pin/Package16PDIP, 20PLCC, 16SOIC  16PDIP, 16SOIC, 20PLCC  
Vin(Max)(V)40  40  
 SamplesSamples
 InventoryInventory

Customers Who Evaluated This Product Also Evaluated

  • UC3909: Switch-mode Lead-Acid Battery Charger with Differential Current Sense
  • BQ2031: Switch-mode Lead-Acid Battery Charger with User-Selectable Charge Algorithms
  • BQ24450: Integrated Charge Controller for Lead-Acid Batteries
  • LM317: 3/4 Pin 1.5A Adjustable Positive Voltage Regulator

More Related Products

Product Information

Features

  • Optimum Control for Maximum Battery Capacity and Life
  • Internal State Logic Provides Three Charge States
  • Precision Reference Tracks Battery Requirements Over Temperature
  • Controls Both Voltage and Current at Charger Output
  • System Interface Functions
  • Typical Standby Supply Current of only 1.6mA

Description

The UC2906 series of battery charger controllers contains all of the necessary circuitry to optimally control the charge and hold cycle for sealed lead-acid batteries. These integrated circuits monitor and control both the output voltage and current of the charger through three separate charge states; a high current bulk-charge state, a controlled over-charge, and a precision float-charge, or standby, state.

Optimum charging conditions are maintained over an extended temperature range with an internal reference that tracks the nominal temperature characteristics of the lead-acid cell. A typical standby supply current requirement of only 1.6mA allows these ICs to predictably monitor ambient temperatures.

Separate voltage loop and current limit amplifiers regulate the output voltage and current levels in the charger by controlling the onboard driver. The driver will supply up to 25mA of base drive to an external pass device. Voltage and current sense comparators are used to sense the battery condition and respond with logic inputs to the charge state logic. A charge enable comparator with a trickle bias output can be used to implement a low current turn-on mode of the charger, preventing high current charging during abnormal conditions such as a shorted battery cell.

Other features include a supply under-voltage sense circuit with a logic output to indicate when input power is present. In addition the over-charge state of the charger can be externally monitored and terminated using the over-charge indicate output and over-charge terminate input.

    

Pricing / Packaging / CAD Design Tools / Samples

PricePackagingCAD Design ToolsSamples
DeviceStatusTemp (oC)Price | QuantityPackage | PinsTop Side MarkingPackage QTY | Package CarrierSymbolsFootprintsSamples
UC3906DWACTIVE-20 to 703.05 | 1kuSOIC (DW) | 16 View 40 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
UC3906DWG4ACTIVE-20 to 703.05 | 1kuSOIC (DW) | 16 View 40 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
UC3906DWTRACTIVE-20 to 702.75 | 1kuSOIC (DW) | 16 View 2000 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this FootprintPurchase Samples
UC3906DWTRG4ACTIVE-20 to 702.75 | 1kuSOIC (DW) | 16 View 2000 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this FootprintPurchase Samples
UC3906JOBSOLETE-20 to 70 CDIP (J) | 16     Download CAD Format for this FootprintNot Available
UC3906NACTIVE-20 to 702.75 | 1kuPDIP (N) | 16 View 25 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
UC3906NG4ACTIVE-20 to 702.75 | 1kuPDIP (N) | 16 View 25 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
UC3906QACTIVE-20 to 703.05 | 1kuPLCC (FN) | 20 View 46 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
UC3906QG3ACTIVE-20 to 703.05 | 1kuPLCC (FN) | 20 View 46 | TUBE Download CAD Format for this Symbol Download CAD Format for this Footprint
UC3906QTRACTIVE-20 to 702.75 | 1kuPLCC (FN) | 20 View 1000 | LARGE T&R Download CAD Format for this Symbol Download CAD Format for this FootprintPurchase Samples
UC3906QTRG3ACTIVE-20 to 702.75 | 1kuPLCC (FN) | 20 View 1000 | LARGE T&R  Purchase Samples

* Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For higher volume price quotes,prices in local currency or delivery quotes, please contact your local Texas Instruments Sales Office or Authorized Distributor.

Inventory

Reported Distributor Inventory as of 9:43 AM GMT, 06 Nov 2009
RegionCompanyIn StockPurchase
TI Lead Time*: 20 WeeksUC3906DW
AmericasArrow >1k
Newark 760
Rochester Electronics 602
EuropeAbacus Polar 60
Arrow Northern Europe 30
Avnet-SILICA 490
WorldwideDigiKey >1k
Mouser Electronics 279
TI Lead Time*: 20 WeeksUC3906DWG4
WorldwideDigiKey  Available
TI Lead Time*: 20 WeeksUC3906DWTR
AmericasAvnet >1k
EuropeArrow Southern Europe >1k
WorldwideDigiKey  Available
TI Lead Time*: 20 WeeksUC3906DWTRG4
WorldwideDigiKey  Available
TI Lead Time*: 20 WeeksUC3906N
AmericasArrow >1k
Avnet >1k
Newark 995
Rochester Electronics 189
AsiaFarnell Asia 90
WPI 79
EuropeArrow Northern Europe 175
Farnell 90
WorldwideDigiKey 526
Mouser Electronics >1k
TI Lead Time*: 20 WeeksUC3906NG4
WorldwideDigiKey  Available
Mouser Electronics 60
TI Lead Time*: 4 WeeksUC3906Q
AmericasAvnet 58
Rochester Electronics 86
WorldwideDigiKey 95
Mouser Electronics 92
TI Lead Time*: 4 WeeksUC3906QG3
WorldwideDigiKey  Available
TI Lead Time*: 1 WeekUC3906QTR
WorldwideDigiKey  Available
TI Lead Time*: 1 WeekUC3906QTRG3
WorldwideDigiKey  Available
View all Distributors  

** Lead time information is not available at this time. However, our information is updated daily so please check back with us soon. Please contact your preferred TI Authorized Distributor for additional information.

Quality & Lead (Pb)-Free Data

 Product ContentDPPM / MTBF / FIT Rate
DeviceEco Plan* Lead / Ball FinishMSL Rating / Peak ReflowDetailsDetails
UC3906DW RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEARViewView
UC3906DWG4 RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEARViewView
UC3906DWTR RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEARViewView
UC3906DWTRG4 RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU Level-2-260C-1 YEARViewView
UC3906N RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU N/A for Pkg TypeViewView
UC3906NG4 RoHS Compliant Green (RoHS & no Sb/Br) CU NIPDAU N/A for Pkg TypeViewView
UC3906Q RoHS Compliant Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEARViewView
UC3906QG3 RoHS Compliant Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEARViewView
UC3906QTR RoHS Compliant Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEARViewView
UC3906QTRG3 RoHS Compliant Green (RoHS & no Sb/Br) CU SN Level-2-260C-1 YEARViewView

* The planned eco-friendly classification: Pb-Free (RoHS) or Pb-Free (RoHS Exempt) or Green (RoHS & no Sb/Br) - please click on the Product Content Details "View" link in the table above for the latest availability information and additional product content details.

If the information you are requesting is not available online at this time, contact one of our Product Information Centers regarding the availability of this information.

Technical Documents

Most useful technical documents for UC3906 Help

Datasheet

Application Notes

Tools & Software

NamePart # Company Tool / Software Type
Quick Search Selection Tool for Battery ChargersBATTERY_CHARGERS_SELECTION_TOOLTexas InstrumentsFree Evaluation Tools

Customers Who Evaluated This Product Also Evaluated...
Part # Name Product Family Comments
UC3909 Switch-mode Lead-Acid Battery Charger with Differential Current Sense BATTERY MANAGEMENT-BATTERY CHARGE MANAGEMENT TI customers also evaluated this product.
BQ2031 Switch-mode Lead-Acid Battery Charger with User-Selectable Charge Algorithms BATTERY MANAGEMENT-BATTERY CHARGE MANAGEMENT TI customers also evaluated this product.
BQ24450 Integrated Charge Controller for Lead-Acid Batteries BATTERY MANAGEMENT-BATTERY CHARGE MANAGEMENT TI customers also evaluated this product.
UC2906 Linear Lead-Acid Battery Charger BATTERY MANAGEMENT-BATTERY CHARGE MANAGEMENT TI customers also evaluated this product.
BQ24105 Standalone Synchronous Switch-Mode Li-Ion Charger w/2A FET in QFN-20, 1 to 3 Cells BATTERY MANAGEMENT-BATTERY CHARGE MANAGEMENT TI customers also evaluated this product.
UC2909 Switch-mode Lead-Acid Battery Charger with Differential Current Sense BATTERY MANAGEMENT-BATTERY CHARGE MANAGEMENT TI customers also evaluated this product.
LM317 3/4 Pin 1.5A Adjustable Positive Voltage Regulator LINEAR REGULATORS-STANDARD VOLTAGE REGULATORS TI customers also evaluated this product.

Support and Community

Customer Tags Help

No Tags are Available for this Part Number

Other Support



Click Here