| 
|
Samples & Purchase Cart- |
- Contact Us
- |
- TI Worldwide: United States
- |
- my.TI Login
|
|
Product InformationFeatures
Description
The UCCx913 family of negative voltage circuit breakers provides complete power management, hot-swap, and fault handling capability. The device is referenced to the negative input voltage and is driven through an external resistor connected to ground, which is essentially a current drive as opposed to the traditional voltage drive. The on-board 10-V shunt regulator protects the device from excess voltage and serves as a reference for programming the maximum allowable output sourcing current during a fault. In the event of a constant fault, the internal timer limits the on-time from less than 0.1% to a maximum of 3%. The duty cycle modulates depending on the current into the PL pin, which is a function of the voltage across the FET, and limits average power dissipation in the FET. The fault level is fixed at 50 mV across the current-sense resistor to minimize total dropout. The fault current level is set with an external current sense resistor. The maximum allowable sourcing current is programmed with a voltage divider from VDD to generate a fixed voltage on the IMAX pin. The current level, when the output appears as a current source, is equal to VIMAX/RSENSE. If desired, a controlled current startup can be programmed with a capacitor on the IMAX pin. When the output current is below the fault level, the output device is switched on. When the output current exceeds the fault level, but is less than the maximum sourcing level programmed by the IMAX pin, the output remains switched on, and the fault timer starts charging CT. Once CT charges to 2.5 V, the output device is turned off and performs a retry some time later. When the output current reaches the maximum sourcing current level, the output appears as a current source, limiting the output current to the set value defined by IMAX. Other features of the UCCx913 family include undervoltage lockout, and 8-pin small outline (SOIC) and dual-in-line (DIP) packages. |
| Price | Packaging | CAD Design Tools | Samples | ||||||
| Device | Status | Temp (oC) | Price | Quantity | Package | Pins | Top Side Marking | Package QTY | Package Carrier | Symbols | Footprints | Samples |
| UCC3913D | ACTIVE | 0 to 70 | 1.65 | 1ku | SOIC (D) | 8 | View | 75 | TUBE | |||
| UCC3913DG4 | ACTIVE | 0 to 70 | 1.65 | 1ku | SOIC (D) | 8 | View | 75 | TUBE | |||
| UCC3913DTR | ACTIVE | 0 to 70 | 1.50 | 1ku | SOIC (D) | 8 | View | 2500 | LARGE T&R | Purchase Samples | ||
| UCC3913DTRG4 | ACTIVE | 0 to 70 | 1.50 | 1ku | SOIC (D) | 8 | View | 2500 | LARGE T&R | Purchase Samples | ||
| UCC3913N | ACTIVE | 0 to 70 | 1.50 | 1ku | PDIP (P) | 8 | View | 50 | TUBE | |||
| UCC3913NG4 | ACTIVE | 0 to 70 | 1.50 | 1ku | PDIP (P) | 8 | View | 50 | TUBE | |||
* Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For higher volume price quotes,prices in local currency or delivery quotes, please contact your local Texas Instruments Sales Office or Authorized Distributor.
| Reported Distributor Inventory as of 9:45 AM GMT, 08 Nov 2009 | |||
| Region | Company | In Stock | Purchase |
| TI Lead Time*: 4 WeeksUCC3913D | |||
| Americas | Avnet | 330 | |
| Rochester Electronics | >1k | ||
| Europe | Avnet-SILICA | 45 | |
| Worldwide | DigiKey | 179 | |
| TI Lead Time*: 4 WeeksUCC3913DG4 | |||
| Europe | EBV Elektronik | 75 | |
| Worldwide | DigiKey | Available | |
| Mouser Electronics | 609 | ||
| TI Lead Time*: 4 WeeksUCC3913DTR | |||
| Worldwide | DigiKey | Available | |
| TI Lead Time*: 4 WeeksUCC3913DTRG4 | |||
| Worldwide | DigiKey | Available | |
| TI Lead Time*: 1 WeekUCC3913N | |||
| Worldwide | DigiKey | 140 | |
| Mouser Electronics | 160 | ||
| TI Lead Time*: 1 WeekUCC3913NG4 | |||
| Worldwide | DigiKey | Available | |
** Lead time information is not available at this time. However, our information is updated daily so please check back with us soon. Please contact your preferred TI Authorized Distributor for additional information.
| Product Content | DPPM / MTBF / FIT Rate | ||||
| Device | Eco Plan* | Lead / Ball Finish | MSL Rating / Peak Reflow | Details | Details |
UCC3913D  | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | View | View |
| UCC3913DG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | View | View |
| UCC3913DTR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | View | View |
| UCC3913DTRG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | View | View |
| UCC3913N | Green (RoHS & no Sb/Br) | CU NIPDAU | N/A for Pkg Type | View | View |
| UCC3913NG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | N/A for Pkg Type | View | View |
* The planned eco-friendly classification: Pb-Free (RoHS) or Pb-Free (RoHS Exempt) or Green (RoHS & no Sb/Br) - please click on the Product Content Details "View" link in the table above for the latest availability information and additional product content details.
If the information you are requesting is not available online at this time, contact one of our Product Information Centers regarding the availability of this information.
Most useful technical documents for UCC3913 
View Application Notes for Hot-Swap Controllers (External FET)
| Description | Part # | Company |
| Flyback with Vin 36-72 V and Vout +/- 135 V | PMP069 | Texas Instruments |
| Hot Swap, Push-Pull, Sync. Buck, Negative Flyback, Dual Sync. Buck Reference Design | PMP156 | Texas Instruments |
| Name | Part # | Company | Tool / Software Type |
| Free tool: UCC3913 Design-in Calculator | UCC3913CALC | Texas Instruments | Calculation Utilities |
| |||
No Tags are Available for this Part Number
Products | Applications | Design Support | Sample & Buy 
TI Worldwide | About TI | Contact Us | Investor Relations | News Center | Corporate Citizenship | Careers | Tags | my.TI Login | All Searches | Site Map
© Copyright 1995-2009 Texas Instruments Incorporated. All rights reserved. Trademarks | Privacy Policy | Terms of Use
