Home Battery management ICs Battery charger ICs
Home
Battery management ICs
Battery charger ICs
NEW

BQ25185

ACTIVE

1-cell, 1-A stand-alone linear battery charger with power path and solar input support

Order now
Data sheet

BQ25185

ACTIVE
Data sheet Order now

Product details

Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 25 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.6 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 125
Number of series cells 1 Charge current (max) (A) 1 Vin (max) (V) 25 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (min) (V) 3.6 Battery charge voltage (max) (V) 4.65 Absolute max Vin (max) (V) 25 Control topology Linear Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (JEITA profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, Power Path, VINDPM (Input voltage threshold to maximize adaptor power) Vin (min) (V) 3 Rating Catalog Operating temperature range (°C) -40 to 125
WSON (DLH) 10 4.4 mm² 2.2 x 2
  • 1-A linear battery charger
    • 3.0-V to 18-V input voltage operating range
    • 25-V tolerant input voltage
    • External resistor programmable operation:
      • ILIM/VSET sets battery regulation voltage to 3.6V, 3.65 V, 4.02 V, 4.1V, 4.2 V, 4.35 V, or 4.4 V
      • ILIM/VSET sets input current limit to 100 mA, 500 mA, or 1100 mA
      • ISET to set charge current from 5 mA to 1 A
    • Li-ion, Li-Poly, and LiFePO4 chemistries support
    • 115-mΩ battery FET ON resistance
    • Up to 3.125-A discharge current to support high system loads
  • Power path management for powering the system and charging the battery
    • Regulated system voltage (SYS) at 4.5 V
    • Configurable input current limit
    • USB Suspend mode supported
    • Battery Tracking input voltage dynamic power management (VINDPM) for high impedance input sources
    • Dynamic power path management optimizes charging from weak adapters
  • Ultra low quiescent current
    • 4-µA in Battery Only mode
    • 30-µA Input adapter Iq in sleep mode
    • 3.2-µA Battery discharge current in Factory Mode
  • Integrated fault protection
    • Input overvoltage protection (VIN_OVP)
    • Battery undervoltage protection (BUVLO)
    • Battery short protection (BATSC)
    • Battery overcurrent protection (BATOCP)
    • Input current limit protection (ILIM)
    • Thermal regulation (TREG) and thermal shutdown (TSHUT)
    • Battery thermal fault protection (TS)
    • Safety timer fault
    • ISET and ILIM/VSET pin short/open protection.
  • 1-A linear battery charger
    • 3.0-V to 18-V input voltage operating range
    • 25-V tolerant input voltage
    • External resistor programmable operation:
      • ILIM/VSET sets battery regulation voltage to 3.6V, 3.65 V, 4.02 V, 4.1V, 4.2 V, 4.35 V, or 4.4 V
      • ILIM/VSET sets input current limit to 100 mA, 500 mA, or 1100 mA
      • ISET to set charge current from 5 mA to 1 A
    • Li-ion, Li-Poly, and LiFePO4 chemistries support
    • 115-mΩ battery FET ON resistance
    • Up to 3.125-A discharge current to support high system loads
  • Power path management for powering the system and charging the battery
    • Regulated system voltage (SYS) at 4.5 V
    • Configurable input current limit
    • USB Suspend mode supported
    • Battery Tracking input voltage dynamic power management (VINDPM) for high impedance input sources
    • Dynamic power path management optimizes charging from weak adapters
  • Ultra low quiescent current
    • 4-µA in Battery Only mode
    • 30-µA Input adapter Iq in sleep mode
    • 3.2-µA Battery discharge current in Factory Mode
  • Integrated fault protection
    • Input overvoltage protection (VIN_OVP)
    • Battery undervoltage protection (BUVLO)
    • Battery short protection (BATSC)
    • Battery overcurrent protection (BATOCP)
    • Input current limit protection (ILIM)
    • Thermal regulation (TREG) and thermal shutdown (TSHUT)
    • Battery thermal fault protection (TS)
    • Safety timer fault
    • ISET and ILIM/VSET pin short/open protection.

The BQ25185 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in a leadless, small package with a thermal pad giving thermal performance. The device can support up to 1-A charging and system loads of up to 3.125 A.

The battery is charged using a standard Li-ion or LiFePO4 charge profile with three phases: precharge, constant current and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is also optimized for battery to battery charging with 3-V minimum input voltage operation and can withstand 25-V absolute maximum line transients. The device integrates a single push-button input to reduce the total solution footprint.

The BQ25185 is a linear battery charger IC focusing on small solution size and low quiescent current for extending battery life. The device is available in a leadless, small package with a thermal pad giving thermal performance. The device can support up to 1-A charging and system loads of up to 3.125 A.

The battery is charged using a standard Li-ion or LiFePO4 charge profile with three phases: precharge, constant current and constant voltage. Thermal regulation provides the maximum charge current while managing the device temperature. The charger is also optimized for battery to battery charging with 3-V minimum input voltage operation and can withstand 25-V absolute maximum line transients. The device integrates a single push-button input to reduce the total solution footprint.
open-in-new Find other Battery charger ICs
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Same functionality with different pin-out to the compared device
BQ25180 ACTIVE 1-A Li-ion and LiFePO4 I²C programmable linear charger with regulated power path, WCSP package BQ25180 comes in a CSP package and is I2C configurable.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet BQ25185 1-Cell, 1-A Standalone Linear Battery Charger with Power Path, Factory Mode, and Battery Tracking VINDPM datasheet PDF | HTML 23 Oct 2023
Certificate BQ25185EVM EU Declaration of Conformity (DoC) 26 Oct 2023
EVM User's guide BQ25185 EVM User's Guide PDF | HTML 20 Oct 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ25185EVM — BQ25185 evaluation module for 1-cell, 1-A stand-alone linear battery charger

The BQ25185 evaluation model (EVM) is designed to evaluate and test various operating modes of the BQ25185. The EVM is designed for a complete test friendly evaluation with visual indicators. The BQ25185 is an integrated battery charge management IC that integrates most common functions for solar (...)

User guide: PDF | HTML
Not available on TI.com
Package Pins Download
WSON (DLH) 10 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos