The BQ77205 family of products provides a range of voltage and temperature monitoring, including overvoltage protection (OVP) and open-wire (OW) protection for Li-ion battery pack systems. Each cell is monitored independently for overvoltage and open-wire conditions.
In the BQ77205 device, an internal delay timer is initiated upon detection of an overvoltage, open-wire condition. Upon expiration of the delay timer, the respective output is triggered into its active state (either high or low, depending on the configuration).
The overvoltage triggers the OUT pin if a fault is detected. If an open-wire fault is detected, then the OUT is triggered. For quicker production-line testing, the BQ77205 device provides a Customer Test Mode (CTM) with significantly reduced delay time.
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | BQ77205 Overvoltage Protection for 3-Series to 5-Series Cell Li-Ion Batteries with Internal Delay Timer datasheet | PDF | HTML | 04 Oct 2023 |
For additional terms or required resources, click any title below to view the detail page where available.
The BQ77207EVM evaluation module (EVM) is a complete evaluation system for the BQ77207, a 3-series to 7-series cell Li-Ion battery protection integrated circuit. The circuit module includes one BQ77207 integrated circuit (IC), thermistor, and all other onboard components necessary to signal (...)
| Package | Pins | Download |
|---|---|---|
| VSSOP (DGK) | 8 | View options |
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.