ADS9813
- 8-channel, 18-bit ADC with analog front-end:
- Simultaneous sampling
- Constant 1MΩ input impedance front-end
- Programmable analog input ranges:
- ±12V, ±10V, ±7V, ±5V, ±3.5V, and ±2.5V
- Single-ended and differential inputs
- Common-mode voltage range: ±12V
- Input overvoltage protection: Up to ±18V
- User-selectable analog input bandwidth:
- 21kHz and 400kHz
- Integrated low-drift precision references:
- ADC reference: 4.096V
- 2.5V reference output for external circuits
- Excellent AC and DC performance at full-throughput:
- DNL: ±0.35LSB, INL: ±1LSB
- SNR: 92.3dBFS, THD: –114dB
- Power supply:
- Analog and digital: 5V and 1.8V
- Digital interface: 1.2V to 1.8V
- Temperature range: –40°C to +125°C
The ADS9813 is an eight-channel data acquisition (DAQ) system based on a simultaneous sampling, 18-bit successive approximation register (SAR) analog-to-digital converter (ADC). The ADS9813 features a complete analog front-end (AFE) for each channel with an input clamp. The device also features a 1MΩ input impedance and a programmable gain amplifier (PGA) with user-selectable bandwidth options. The high input impedance allows direct connection with sensors and transformers, thus eliminating the need for external driver circuits. Configure the ADS9813 to accept ±12V, ±10V, ±7V, ±5V, ±3.5V, and ±2.5V bipolar inputs with up to ±12V input common-mode voltage.
A digital interface supporting 1.2V to 1.8V operation enables the ADS9813 to be used without external voltage level translators.
기술 문서
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | ADS9813 18-Bit, 2MSPS, 8-Channel, Simultaneous-Sampling ADC With Integrated Analog Front-End datasheet | PDF | HTML | 2024/04/10 |
EVM User's guide | ADS9813EVM and ADS9817EVM User's Guide (Rev. B) | PDF | HTML | 2024/01/23 | |
Certificate | ADS9813EVM EU Declaration of Conformity (DoC) | 2023/09/18 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
ADS9813EVM — ADS9813 평가 모듈
ANALOG-ENGINEER-CALC — 아날로그 엔지니어의 계산기
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | 다운로드 |
---|---|---|
VQFN (RSH) | 56 | 옵션 보기 |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치
권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.