Data sheet
DLP4500
- 0.45-Inch Diagonal Micromirror Array
- 912 × 1140 Resolution Array (>1 Million Micromirrors)
- Diamond Array Orientation Supports Side Illumination for Simplified, Efficient Optics Designs
- Capable of WXGA Resolution Display
- 7.6-µm Micromirror Pitch
- ±12° Tilt Angle
- 5-µs Micromirror Crossover Time
- Highly Efficient Steering of Visible Light
- Window Transmission Efficiency 96% Nominal ( 420 to 700 nm, Single Pass Through Two Window Surfaces)
- Polarization-Independent Aluminum Micromirrors
- Array Fill Factor 92% (Nominal)
- Dedicated DLPC350 Controller for Reliable Operation
- Binary Pattern Rates Up to 4 kHz
- Pattern Sequence Mode for Control Over Each Micromirror in Array
- Integrated Micromirror Driver Circuitry
- 9.1-mm × 20.7-mm for Portable Instruments
- FQE Package With Simple Connector Interface
- FQD Package With Enhanced Thermal Interface
Request more information
An optical module will be required for you to continue development. View the optical module search tool to select an optical module that works with your DMD. View more information
Technical documentation
No results found. Please clear your search and try again.
View all 18 Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Evaluation board
DLPLCR4500EVM — DLP® LightCrafter™ 4500
The DLP® LightCrafter™ 4500 development module provides a flexible light steering solution with high brightness and resolution for industrial, medical and scientific applications. DLP LightCrafter 4500 features the 0.45 WXGA chipset and offers a compelling combination of resolution, (...)
User guide: PDF
Optical module
DLP-OMM-SEARCH — DLP® Products third-party search tools
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
Optical module
ANHUA-3P-DLP45OPTICALMOD — Anhua Opto DLP4500 optical modules
Anhua Optoelectronics offers a variety of production ready optical modules featuring DLP® 0.45” WXGA DMD for different throw ratio, brightness level, size and wavelength options. Requests for system modifications including changing the light source or redesigning the optical system are welcome.
User guide: PDF
Optical module
EKB-3P-DLP4500EVM — EKB DLP4500 evaluation modules
EKB's E4500 MKII™ development modules provide flexible light steering solutions with different illumination sources including UV, IR and RGB for industrial, medical and scientific applications. The E4500 MKII modules feature the DLP® 0.45 WXGA chipset and offer a compelling combination of (...)
From: EKB Technologies Ltd.
User guide: PDF
Optical module
IVIEW-3P-WXGA-LED — iView DLP4500 optical module including RGB LEDs and driver board
iView DLP4500 optical module including RGB LEDs and driver board.
From: iView Limited
Optical module
KP-3P-DLP4500EVM — Keynote Photonics DLP4500 evaluation modules
Keynote Photonics offers a number of optical engine options, featuring DLP4500/DLPC350 DLP® chipset.
The LC4500-RGB optical engine provides a full color, high resolution projector for your display applications. Excellent uniformity and short focus capability enable a wide range of applications. The (...)
The LC4500-RGB optical engine provides a full color, high resolution projector for your display applications. Excellent uniformity and short focus capability enable a wide range of applications. The (...)
From: Keynote Photonics
User guide: PDF
Optical module
WDST-3P-PRO4500 — Wintech PRO4500 Production Ready Optical Engine
Wintech’s production ready optical engine (PRO4500) is a high brightness modular DLP-based projector designed for industrial applications. The PRO4500 is based on Texas Instrument’s DLP LightCrafter 4500 that utilizes the DLP4500 WXGA DMD and is compatible with both DLP4500FQE (150 (...)
Application software & framework
OPTECKS-3P-LIGHT-ANIMATOR — Optecks Light Animator Software for DLP Advanced Light Control Products
Optecks’ Light Animator is a software package with a visual interface that allows scientists and engineers to quickly design pattern sequences and triggering for light control applications using DLP® technology. Light Animator supports the DLP LightCrafter 6500, DLP Discovery 4100 and DLP (...)
From: Optecks, LLC
Firmware
DLPR350 — DLPC350 Configuration and Support Firmware
The DLP 0.45 WXGA chipset consists of the DLP4500 DMD and DLPC350 controller. To enable broad functionality of the chipset and ensure reliable operation of the DLP4500 micromirrors, TI is offering DLPR350 configuration and support firmware. Combined with the DLPC350 controller, the DLPR350 (...)
3D DMD mechanical geometry
DLPM041 — DLP4500/DLP4500NIR DMD With FQD Package (Series 310) 3D-CAD Geometry
Supported products & hardware
Products
Spectroscopy & optical networking products
Visible products (420 to 700 nm)
Calculation tool
DMD-DIFFRACTION-EFFICIENCY-CALCULATOR — Calculator helps model DMD diffraction patterns and diffraction efficiency
The DMD Diffraction Efficiency Calculator is used to help customers understand how to model DMD diffraction patterns and diffraction efficiency with their specific DMD input parameters and will be modeled to the customers specific design.
Supported products & hardware
Products
≥ 0.47-in array products
≤ 0.47-in array pico products
UV products (< 400 nm)
Visible products (420 to 700 nm)
Spectroscopy & optical networking products
Exterior lighting & projection products
Near-UV products (400 to 420 nm)
Display products
Near-infrared products (> 700 nm)
Multi-channel ICs (PMICs)
Hardware development
Evaluation board
Development kit
Optical module
DMD mounting design
DLPR069 — Series 310 DMD Mounting and Electrical Interconnect Information
Supported products & hardware
Products
Spectroscopy & optical networking products
Visible products (420 to 700 nm)
Reference designs
TIDA-00293 — Best-in-class Combination Stereolithography 3D Printer Development Using DLP® Technology
This DLP® 3D printer reference design employs our DLP 3D structured light software sevelopment kit (SDK) and enables you to build best-in-class resolution 3D objects. The highly-differentiated DLP technology uses stereo-lithography technique popular in high-accuracy and high-speed 3D printing. (...)
Reference designs
TIDEP0076 — 3D Machine Vision Reference Design Based on AM572x Processor with DLP® Structured Light
The TIDEP0076 3D machine vision design describes an embedded 3D scanner based on the structured light principle. A digital camera along with a Sitara™ AM57xx processor System on Chip (SoC) is used to capture reflected light patterns from a DLP4500-based projector. Subsquent processing (...)
Reference designs
DLP4500-C350REF — High Resolution, Portable Light Steering Reference Design using DLP Technology
This reference design, featuring the DLP® 0.45” WXGA chipset and implemented in the DLP® LightCrafter™ 4500 evaluation module (EVM), enables flexible control of high resolution, accurate patterns for industrial, medical, and scientific applications. With a free USB-based GUI and (...)
Reference designs
TIDA-00254 — Accurate Point Cloud Generation for 3D Machine Vision Applications using DLP® Technology
The 3D Machine Vision reference design employs Texas Instruments DLP® Advanced Light Control Software Development Kit (SDK) for LightCrafter™ series controllers, which allows developers to easily construct 3D point clouds by integrating TI’s digital micromirror device (DMD) (...)
| Package | Pins | Download |
|---|---|---|
| DLP-S241 (FQE) | 80 | View options |
| DLP-S310 (FQD) | 98 | View options |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.