Home Motor drivers Brushless DC (BLDC) motor drivers BLDC drivers
Home
Motor drivers
Brushless DC (BLDC) motor drivers
BLDC drivers
NEW

DRV8329-Q1

ACTIVE

Automotive 60V three-phase gate driver with single current-sense amplifier

Order now
Data sheet

DRV8329-Q1

ACTIVE
Data sheet Order now

Product details

Rating Automotive Architecture Gate driver Control interface 3xPWM, 6xPWM Vs (min) (V) 4.5 Vs ABS (max) (V) 65 Features 1x low side current sense, Bootstrap Architecture for Gate Driver, HW based configuration, Supports 100% PWM Duty Cycle with Trickle Charge pump Operating temperature range (°C) -40 to 125
Rating Automotive Architecture Gate driver Control interface 3xPWM, 6xPWM Vs (min) (V) 4.5 Vs ABS (max) (V) 65 Features 1x low side current sense, Bootstrap Architecture for Gate Driver, HW based configuration, Supports 100% PWM Duty Cycle with Trickle Charge pump Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² 7 x 5
  • 65-V Three Phase Half-Bridge Gate Driver
    • Drives 3 High-Side and 3 Low-Side N-Channel MOSFETs (NMOS)
    • 4.5 to 60-V Operating Voltage Range
    • Supports 100% PWM Duty Cycle with Trickle Charge pump
  • Bootstrap based Gate Driver Architecture
    • 1000-mA Maximum Peak Source Current
    • 2000-mA Maximum Peak Sink Current
  • Integrated Current Sense Amplifier with low input offset (optimized for 1 shunt)
    • Adjustable Gain (5, 10, 20, 40 V/V)
  • Hardware interface provides simple configuration
  • Ultra-low power sleep mode <1 uA at 25 ̊C
  • 4-ns (typ) propagation delay matching between phases
  • Independent driver shutdown path (DRVOFF)
  • 65-V tolerant wake pin (nSLEEP)
  • Supports negative transients upto -10V on SHx
  • 6x and 3x PWM Modes
  • Supports 3.3-V, and 5-V Logic Inputs
  • Accurate LDO (AVDD), 3.3 V ±3%, 80 mA
  • Compact QFN Packages and Footprints
  • Adjustable VDS overcurrent threshold through VDSLVL pin
  • Adjustable deadtime through DT pin
  • Efficient System Design With Power Blocks
  • Integrated Protection Features
    • PVDD Undervoltage Lockout (PVDDUV)
    • GVDD Undervoltage (GVDDUV)
    • Bootstrap Undervoltage (BST_UV)
    • Overcurrent Protection (VDS_OCP, SEN_OCP)
    • Thermal Shutdown (OTSD)
    • Fault Condition Indicator (nFAULT)
  • 65-V Three Phase Half-Bridge Gate Driver
    • Drives 3 High-Side and 3 Low-Side N-Channel MOSFETs (NMOS)
    • 4.5 to 60-V Operating Voltage Range
    • Supports 100% PWM Duty Cycle with Trickle Charge pump
  • Bootstrap based Gate Driver Architecture
    • 1000-mA Maximum Peak Source Current
    • 2000-mA Maximum Peak Sink Current
  • Integrated Current Sense Amplifier with low input offset (optimized for 1 shunt)
    • Adjustable Gain (5, 10, 20, 40 V/V)
  • Hardware interface provides simple configuration
  • Ultra-low power sleep mode <1 uA at 25 ̊C
  • 4-ns (typ) propagation delay matching between phases
  • Independent driver shutdown path (DRVOFF)
  • 65-V tolerant wake pin (nSLEEP)
  • Supports negative transients upto -10V on SHx
  • 6x and 3x PWM Modes
  • Supports 3.3-V, and 5-V Logic Inputs
  • Accurate LDO (AVDD), 3.3 V ±3%, 80 mA
  • Compact QFN Packages and Footprints
  • Adjustable VDS overcurrent threshold through VDSLVL pin
  • Adjustable deadtime through DT pin
  • Efficient System Design With Power Blocks
  • Integrated Protection Features
    • PVDD Undervoltage Lockout (PVDDUV)
    • GVDD Undervoltage (GVDDUV)
    • Bootstrap Undervoltage (BST_UV)
    • Overcurrent Protection (VDS_OCP, SEN_OCP)
    • Thermal Shutdown (OTSD)
    • Fault Condition Indicator (nFAULT)

The DRV8329-Q1 family of devices is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The Gate Drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The DRV8329-Q1 can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

The 6x and 3x PWM modes allow for simple interfacing to controller circuits. The device has integrated accurate 3.3-V LDO that can be used to power external controller and can be used as reference for CSA. The configuration settings for the device are configurable through hardware (H/W) pins.

The DRV8329-Q1 devices integrate low-side current sense amplifier that allow current sensing for sum of current from all three phases of the drive stage.

A low-power sleep mode is provided to achieve low quiescent current by shutting down most of the internal circuitry. Internal protection functions are provided for undervoltage lockout, GVDD fault, MOSFET overcurrent, MOSFET short circuit, and overtemperature. Fault conditions are indicated on nFAULT pin.

The DRV8329-Q1 family of devices is an integrated gate driver for three-phase applications. The devices provide three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support 100% duty cycle. The Gate Drive architecture supports peak gate drive currents up to 1-A source and 2-A sink. The DRV8329-Q1 can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

The 6x and 3x PWM modes allow for simple interfacing to controller circuits. The device has integrated accurate 3.3-V LDO that can be used to power external controller and can be used as reference for CSA. The configuration settings for the device are configurable through hardware (H/W) pins.

The DRV8329-Q1 devices integrate low-side current sense amplifier that allow current sensing for sum of current from all three phases of the drive stage.

A low-power sleep mode is provided to achieve low quiescent current by shutting down most of the internal circuitry. Internal protection functions are provided for undervoltage lockout, GVDD fault, MOSFET overcurrent, MOSFET short circuit, and overtemperature. Fault conditions are indicated on nFAULT pin.
open-in-new Find other BLDC drivers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 1
Type Title Date
* Data sheet DRV8329-Q1 4.5 to 60 V Three-phase BLDC Gate Driver datasheet PDF | HTML 07 Mar 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV8329AEVM — DRV8329A evaluation module for three-phase BLDC gate driver

The DRV8329AEVM is a 30-A, 3-phase brushless DC drive stage based on the DRV8329A gate driver for BLDC motors. The DRV8329 incorporates three diodes for bootstrap operation without the need for external diodes. The device includes a current shunt amplifier for low-side current measurement, 80-mA (...)

User guide: PDF | HTML
Not available on TI.com
Calculation tool

BLDC-MAX-QG-MOSFET-CALCULATOR — Calculate the maximum QG MOSFET for your motor driver

Calculate the maximum QG MOSFET that can be driven based on the PWM switching frequency, algorithm type, and additional external capacitance.
Supported products & hardware

Supported products & hardware

Products
BLDC drivers
DRV8320 — 65-V max 3-phase smart gate driver DRV8320R — 65-V max 3-phase smart gate driver with buck regulator DRV8323 — 65-V max 3-phase smart gate driver with current shunt amplifiers DRV8323R — 65-V max 3-phase smart gate driver with buck regulator & current shunt amplifiers DRV8329 — 60V three-phase gate driver with single current-sense amplifier DRV8329-Q1 — Automotive 60V three-phase gate driver with single current-sense amplifier DRV8334 — 60-V 1000-mA to 2000-mA 3-phase gate driver with accurate current sensing DRV8340-Q1 — Automotive 12-V to 24-V battery 3-phase smart gate driver DRV8343-Q1 — Automotive 12-V to 24-V battery 3-phase smart gate driver with current shunt amplifiers DRV8350 — 102-V max 3-phase smart gate driver DRV8350F — 102-V max 3-phase Functional Safety Quality-Managed smart gate driver DRV8350R — 102-V max 3-phase smart gate driver with buck regulator DRV8353 — 102-V max 3-phase smart gate driver with current shunt amplifiers DRV8353F — 102-V max 3-phase Functional Safety Quality-Managed smart gate driver with 3x CSA DRV8353M — 102-V max 3-phase smart gate driver with current shunt amplifiers and extended temperature DRV8353R — 102-V max 3-phase smart gate driver with buck regulator & current shunt amplifiers
Download
Package Pins Download
VQFN (RGF) 40 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos