Home Power management Power switches Ideal diode/ORing controllers
Home
Power management
Power switches
Ideal diode/ORing controllers

LM74502-Q1

ACTIVE

Automotive reverse polarity protection controller, overvoltage protection, gate drive strength 60 μA

Order now
Data sheet

LM74502-Q1

ACTIVE
Data sheet Order now

Product details

Vin (min) (V) 3.2 Vin (max) (V) 65 Number of channels 1 Features Enable, Inrush current control, Overvoltage protection, Reverse polarity protection Iq (typ) (mA) 0.06 Iq (max) (mA) 0.11 TI functional safety category Functional Safety-Capable FET External single FET IGate source (typ) (µA) 60 IGate source (max) (µA) 77 IGate sink (typ) (mA) 2370 IGate pulsed (typ) (A) 2.37 Operating temperature range (°C) -40 to 125 IReverse (typ) (µA) 100 Design support EVM Rating Automotive Imax (A) 250 Shutdown current (ISD) (mA) (A) 0.001 Device type Reverse polarity protector Product type Reverse polarity protector
Vin (min) (V) 3.2 Vin (max) (V) 65 Number of channels 1 Features Enable, Inrush current control, Overvoltage protection, Reverse polarity protection Iq (typ) (mA) 0.06 Iq (max) (mA) 0.11 TI functional safety category Functional Safety-Capable FET External single FET IGate source (typ) (µA) 60 IGate source (max) (µA) 77 IGate sink (typ) (mA) 2370 IGate pulsed (typ) (A) 2.37 Operating temperature range (°C) -40 to 125 IReverse (typ) (µA) 100 Design support EVM Rating Automotive Imax (A) 250 Shutdown current (ISD) (mA) (A) 0.001 Device type Reverse polarity protector Product type Reverse polarity protector
SOT-23-THN (DDF) 8 8.12 mm² 2.9 x 2.8
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • 3.2-V to 65-V input range (3.9-V start-up)
  • –65-V input reverse voltage rating
  • Integrated charge pump to drive
    • External back-to-back N-Channel MOSFETs
    • External high side switch MOSFET
    • External reverse polarity protection MOSFET
  • Gate drive variants
    • LM74502-Q1: 60-µA peak gate drive source capacity
    • LM74502H-Q1: 11-mA peak gate drive source capacity
  • 2-A peak gate sink capacity
  • 1-µA shutdown current (EN/UVLO = Low)
  • 45-µA typical operating quiescent current (EN/UVLO = High)
  • Adjustable overvoltage and undervoltage protection
  • Meets automotive ISO7637 pulse 1 transient requirements with additional TVS diode
  • Available in 8-pin SOT-23 package 2.90 mm × 1.60 mm
  • AEC-Q100 qualified with the following results
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification level 2
    • Device CDM ESD classification level C4B
  • 3.2-V to 65-V input range (3.9-V start-up)
  • –65-V input reverse voltage rating
  • Integrated charge pump to drive
    • External back-to-back N-Channel MOSFETs
    • External high side switch MOSFET
    • External reverse polarity protection MOSFET
  • Gate drive variants
    • LM74502-Q1: 60-µA peak gate drive source capacity
    • LM74502H-Q1: 11-mA peak gate drive source capacity
  • 2-A peak gate sink capacity
  • 1-µA shutdown current (EN/UVLO = Low)
  • 45-µA typical operating quiescent current (EN/UVLO = High)
  • Adjustable overvoltage and undervoltage protection
  • Meets automotive ISO7637 pulse 1 transient requirements with additional TVS diode
  • Available in 8-pin SOT-23 package 2.90 mm × 1.60 mm

The LM74502-Q1, LM74502H-Q1 is an automotive AEC-Q100 qualified controller which operates in conjunction with an external back-to-back connected N-channel MOSFETs as a low loss reverse polarity protection and load disconnect solution. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V. The LM74502-Q1, LM74502H-Q1 does not have reverse current blocking and is suitable for input reverse polarity protection of loads that can potentially deliver energy back to the input supply such as automotive body control module motor loads.

The LM74502-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74502-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current, thus offering low system current when put into sleep mode. LM74502-Q1 offers programmable overvoltage and undervoltage protection which cuts off the load from the input source in case of these faults.

The LM74502-Q1, LM74502H-Q1 is an automotive AEC-Q100 qualified controller which operates in conjunction with an external back-to-back connected N-channel MOSFETs as a low loss reverse polarity protection and load disconnect solution. The wide supply input range of 3.2 V to 65 V allows control of many popular DC bus voltages such as 12-V, 24-V and 48-V automotive battery systems. The 3.2-V input voltage support is particularly well suited for severe cold crank requirements in automotive systems. The device can withstand and protect the loads from negative supply voltages down to –65 V. The LM74502-Q1, LM74502H-Q1 does not have reverse current blocking and is suitable for input reverse polarity protection of loads that can potentially deliver energy back to the input supply such as automotive body control module motor loads.

The LM74502-Q1 controller provides a charge pump gate drive for an external N-channel MOSFET. The high voltage rating of LM74502-Q1 helps to simplify the system designs for automotive ISO7637 protection. With the enable pin low, the controller is off and draws approximately 1 µA of current, thus offering low system current when put into sleep mode. LM74502-Q1 offers programmable overvoltage and undervoltage protection which cuts off the load from the input source in case of these faults.
filter Find other Ideal diode/ORing controllers
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
LM74502H-Q1 ACTIVE Automotive reverse polarity protection controller, overvoltage protection, gate drive strength 11 mA Reverse polarity protection (RPP) controller with 11-mA gate drive strength
Same functionality with different pin-out to the compared device
LM74501-Q1 ACTIVE Automotive 3.2-V to 65-V reverse polarity protection controller with integrated VDS clamp TVS-less reverse polarity protection (RPP) controller with -18-V RPP threshold

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet LM74502-Q1, LM74502H-Q1 Automotive Low IQ Reverse Polarity Protection Controller with Overvoltage Protection datasheet (Rev. A) PDF | HTML 02 May 2022
Functional safety information LM74502-Q1, LM74502H-Q1 Functional Safety FIT Rate, Failure Mode Distribution and Pin FMA PDF | HTML 21 Feb 2024
User guide LM74502Q1EVM: Evaluation Module for LM74502-Q1 and LM74502H-Q1 Ideal Diode PDF | HTML 25 Jan 2022
Certificate LM74502Q1EVM EU RoHS Declaration of Conformity (DoC) 09 Dec 2021

Design & development

Please view the Design & development section on a desktop.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos