NEW

UCC25660

ACTIVE

Wide-VIN/VOUT 750-kHz LLC controller

Product details

Vin (min) (V) 9 Vin (max) (V) 18.5 Operating temperature range (°C) -40 to 125 Control mode Current Topology Half bridge, LLC Rating Catalog
Vin (min) (V) 9 Vin (max) (V) 18.5 Operating temperature range (°C) -40 to 125 Control mode Current Topology Half bridge, LLC Rating Catalog
SOIC (DDB) 14 59.4 mm² 9.9 x 6
  • 50kHz to 750kHz full-load switching frequency
  • IPPC control enables wide input & output LLC (WLLC) operation
  • Enhanced light load management:
    • High frequency pulse skip for improved light load efficiency
    • Low frequency burst for low standby power
    • Audible frequency range skip for reduced audible noise
    • Integrated PFC on/off control signal to help further reduce standby power
  • Internal resonant-capacitor voltage synthesizer for enhanced signal reliability and high startup frequency support
  • Automatic capacitive region avoidance
  • Adaptive softs start with minimized inrush current
  • Integrated high-voltage startup ( UCC256601, UCC256602, and UCC256604)
  • X-capacitor discharge ( UCC256601 and UCC256604).
  • Integrated +0.6/-1.2A gate drive
  • Complete protections
    • 50ns Over-Current Protection (OCP) - cycle-by-cycle current limit
    • Over-Voltage Protection (OVP), internal and external Over-Temperature Protection (OTP)
    • Input and VCCP UVLO with Internal 19V VCCP Clamp
  • SOIC-14 package with removed pins for high-voltage clearance
  • 50kHz to 750kHz full-load switching frequency
  • IPPC control enables wide input & output LLC (WLLC) operation
  • Enhanced light load management:
    • High frequency pulse skip for improved light load efficiency
    • Low frequency burst for low standby power
    • Audible frequency range skip for reduced audible noise
    • Integrated PFC on/off control signal to help further reduce standby power
  • Internal resonant-capacitor voltage synthesizer for enhanced signal reliability and high startup frequency support
  • Automatic capacitive region avoidance
  • Adaptive softs start with minimized inrush current
  • Integrated high-voltage startup ( UCC256601, UCC256602, and UCC256604)
  • X-capacitor discharge ( UCC256601 and UCC256604).
  • Integrated +0.6/-1.2A gate drive
  • Complete protections
    • 50ns Over-Current Protection (OCP) - cycle-by-cycle current limit
    • Over-Voltage Protection (OVP), internal and external Over-Temperature Protection (OTP)
    • Input and VCCP UVLO with Internal 19V VCCP Clamp
  • SOIC-14 package with removed pins for high-voltage clearance

The UCC25660 is a high-frequency LLC controller implementing Input-Power Proportional Control (IPPC) scheme, along with an enhanced light-load management and multiple protection features.

IPPC widens the control range of the LLC converter simplifies the design of wide input and output-voltage range applications such as LED drivers, battery chargers. It can even work without a PFC for non-universal input applications.

The UCC25660’s enhanced light-load management improves while minimizing audible noise. To minimize standby power, the UCC25660 can directly disable the PFC controller when operating in burst mode.

The automatic capacitive region avoidance scheme along with the adaptive soft start with reverse recovery avoidance scheme ensures that the device can never work in a mode where there is a potential to damage the FET’s. This scheme makes the controller ideal for working with a pre-biased load.

The UCC25660 comes with robust protection to help you design a reliable power supply. The UCC25660 has options supporting high-voltage startup, X-capacitor (X-cap) discharge, OVP response, and extended power range. See details in the device comparison table.

The UCC25660 is a high-frequency LLC controller implementing Input-Power Proportional Control (IPPC) scheme, along with an enhanced light-load management and multiple protection features.

IPPC widens the control range of the LLC converter simplifies the design of wide input and output-voltage range applications such as LED drivers, battery chargers. It can even work without a PFC for non-universal input applications.

The UCC25660’s enhanced light-load management improves while minimizing audible noise. To minimize standby power, the UCC25660 can directly disable the PFC controller when operating in burst mode.

The automatic capacitive region avoidance scheme along with the adaptive soft start with reverse recovery avoidance scheme ensures that the device can never work in a mode where there is a potential to damage the FET’s. This scheme makes the controller ideal for working with a pre-biased load.

The UCC25660 comes with robust protection to help you design a reliable power supply. The UCC25660 has options supporting high-voltage startup, X-capacitor (X-cap) discharge, OVP response, and extended power range. See details in the device comparison table.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 8
Type Title Date
* Data sheet UCC25660750kHz Wide VIN/VOUTRange LLC Controller Optimizedfor Light-Load Efficiency datasheet (Rev. A) PDF | HTML 09 Nov 2023
Certificate CB TEST CERTIFICATE US-43600-UL 28 Mar 2024
Certificate CB TEST CERTIFICATE US-43601-UL 28 Mar 2024
Technical article LLC 시리즈 공진 컨버터 상자를 벗어나 생각하기 PDF | HTML 22 Mar 2024
Technical article 跳出 LLC 串聯諧振轉換器的思維框架 PDF | HTML 20 Mar 2024
Technical article Think outside the LLC series resonant converter box PDF | HTML 22 Feb 2024
Product overview UCC25660x Selection Guide PDF | HTML 14 Sep 2023
Certificate UCC25660EVM-064 EU Declaration of Conformity (DoC) 12 Jun 2023

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

UCC25660EVM-064 — UCC25660 evaluation module

The UCC25660EVM-064 assists designers to evaluate the operation and performance of the UCC25660 LLC resonant controller. This evaluation module (EVM) demonstrates how UCC25660 controls the LLC resonant half-bridge DC/DC converter to achieve high efficiency throughout the load and input voltage (...)
User guide: PDF | HTML
Not available on TI.com
Calculation tool

UCC25660X-CALC UCC25660X Design Calculator

The purpose of this tool is to aid in the design of the main power stage components of a LLC Resonant Converter along with component calculations using UCC25660x controller.
Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC controllers (external FET)
UCC25660 Wide-VIN/VOUT 750-kHz LLC controller
Package Pins Download
SOIC (DDB) 14 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos